The replacement heel tip comes in a cost-saving twin pack (2 pairs).
After many wears, it is common that the heel tip will start to wear out. But don't worry, all shoes experience that.
All you need to do is to replace it with a new one! We know how hard it is to find a cobbler that has the exact same heel tip as our shoes. So, simply get these replacement heel tips and bring them to your preferred cobbler or shoe specialist to get them replaced.
There are 2 different sizes (please select the right category)
Heel Tip for Flats
Heel Tip for Heels
Replacement Heel Tip - Series 1 is...
Suitable for: The Bow, Ribbon, Huggy, Snake & Leather Collections.
NOT suitable for: The Sling Collection
Note: Don't wait till your heel tips fall/break off, replace it when it starts showing signs of wear and tear (i.e. cracked heel tip). For more info, check out our blog.
T-shaped Heel grips are great to prevent the common problem of shoe slippage which could lead to blisters.
Anti-slip: Its soft material yet gripping design prevents the common problem of shoe slippage, caused by narrow bone structure or shoes that are a little too big for the feet.
Anti-blisters: By helping to hold the heel in place and reducing friction, the t-shaped heel grip prevents blisters from forming.
Natural Gel Silicone: Natural gel silicone is soft, flexible, elastic and non-slippery. The gel silicone material is reusable and washable. It bounces back to shape after long-wearing. Unlike cloth or fabric cushion, silicone prevents the heel from rubbing against the skin.
Self-adhesive: The ergonomic design makes the gel insoles long-lasting. They don't slip-off with movement, thus protecting your feet. They won't roll or curl up, unlike normal heel liners.
Function: 2 in 1 Heel grip and cushion (prevents blisters and shoe slippage)
Material: Natural Gel Silicone
Colour: Transparent (blends well with any shoe colour!)
Size: Approx. 10 x 14 cm (free size)
Care Instructions: Just wash the pads with warm soapy water and let it air dry on a flat surface, with adhesive facing up. Parts that are in contact with leather fibre will naturally stick to the adhesive, that makes it hard to be removed. If the adhesive is wearing off for those parts, simply use double-sided tape to secure it back on to your shoes.
Orthotic Gel Arch Support Insole Pads (Twin pack - 2 pairs)
Pain Relief: Its special 3D design helps to ease pain caused by low arch height. Because of its ergonomic design, no matter what shoes you wear, it'll effectively reduce the pressure on your feet, thus relieving you of feet pain and fatigue (especially after long periods of standing and/or walking).
Natural Gel Silicone: Natural gel silicone is soft, flexible, elastic and harmless to the feet. The gel silicone material is reusable and washable. It bounces back to shape after long-wearing.
Self-adhesive: The ergonomic design makes the gel insoles long-lasting. They don't slip-off with movement, thus protecting your feet. They fit well in all kinds of shoes, from heels to sandals. You can wear them with or without socks.
Excellent Shock Absorption: The elastic gel insoles distribute the pressure created by each step and provide additional support for feet and ankle muscles to reduce foot strain and fatigue. They play a vital role in shock absorption, thus making it comfortable to wear.
Function: Orthotic Arch Support
Material: Natural Gel Silicone
Size: Approx. 10 x 5.5 cm (one size)
Care Instructions: Just wash the pads with warm soapy water and let it air dry on a flat surface, with adhesive facing up.
- It is advisable to replace pads after 3 months, if it were to be used on a daily basis for long-hours. This is to ensure maximum support.
- Since this is an orthotic support pad, it takes time for your feet to get used to the external arch support. Wear it for a few hours, 3-4 hours for the first few wears.
- If you suffer from completely flat feet or plantar fasciitis, it is best that you wear a 3/4 insole instead of an arch support pad.
How to use:
1) Wipe clean the shoe insoles. Ensure that the insole is dry.
2) Remove the clear plastic film from the arch support pads.
3) Position it in the insole of your shoes and paste it.
4) Test by wearing the shoes. Readjust the placement, if needed. When you've positioned it well, press the pads gently on the insole of your shoes to secure it.
Developed by Australian podiatrists, Footlogics Bellais a cushioning orthotic that fits perfectly in all ladies' footwear with a low to medium heel height. The insole provides biomechanical arch and forefoot support to re-align the feet to a more natural position. This greatly reduces the excess force on the forefoot, heel and arch, thereby providing lasting relief from pain and discomfort.
What makes this Orthotic Insoles great?
- 3/4 length makes it suitable for most ladies shoes (even ballerinas) - Ribbed surface to prevent slipping - Soft gel pad to cushion the heel - Metatarsal raise to support the forefoot/ball of the foot - Biomechanical arch support to re-align the foot - Soft & comfortable Velours top layer - Distributes body weight evenly over the entire foot
The Orthotic Insoles come in 3 different sizes based on your shoe size in EU:
XS: 36 - 38 S: 38.5 - 40 M: 40.5 - 42
Tips: It is better to get a size up for your shoes if you are wearing this insole, so as to enjoy a more relaxed fit.
Get the original product only at TOUFIE.
TOUFIE is the Authorized Distributor for Footlogics (Bella)
Our Toe Fillers are designed to provide an adequate filling to shoes that are slightly too big.
Soft with shock absorption: The toe fillers are made to be elastic, flexible, and shock absorbent. It also relieves pressure and pain on toes caused by the impact of feet slippage.
Lightweight and ergonomically shaped: Lightweight and shaped ergonomically for a comfortable fit even for those with sensitive toes.
Reusable and washable: Just wash the fillers with warm soapy water and it is ready to be used again.
Suitable for most shoes: Suitable for both men and women shoes. The toe fillers can be used for any type of shoes as long as it comes with a covered toe front.
Adjustable shape: The shape of the toe fillers can be adjusted to fit kids’ shoes, small sized adult shoes, and even shoes with rounded toe front. The material allows it to be customized to the required size and shape.
Function: Several uses:
(1) To fill the gaps for shoes that are slightly too big.
(2) To relieve pressure for bunions or wide feet, size up for your shoes and use a toe filler.
(3) For those with narrow heel bone structures, use a toe filler to prevent your strap from slipping down.
(4) To be used in heels. To prevent the pain to the toes caused by slippage of the feet.
Material: High-density EVA foam
Colour: Black (Each packaging comes in a pair)
Size: Free size
Care Instructions: Just wash the fillers with warm soapy water and it is ready to be used again.
How to use:
1) Wipe clean the inside of your shoes. Ensure that the insole is dry.
2) Insert the toe fillers in the front of the shoes.
3) Adjust accordingly. If the shoes feel too tight, just remove one of the internal fillings.
Chamberlain’s Leather Milk recipes No.1, No. 2 and No. 3 for the ultimate leather cleaning, leather conditioning and leather protection solution! The Complete Leather Care Kit comes with a FREE Leather Care Cloth for best results! It is advisable to use a separate cloth/section of the cloth for the application of different products.
Use the product in this order: No.2, No.1 and No.3. The numbers on the bottles refer to the recipe number not the sequence of use.
Leather Straight Cleaner No. 2 It is an optimal blend of all-natural, plant-based ingredients specially designed to deeply penetrate leather’s pores and remove harmful contaminants, stains and spills. Due to its unique composition, this recipe will pull out more debris than traditional cleaners will, and is carefully concocted to ensure the safest and easiest cleansing experience possible. Always follow up with the Leather Care Liniment (Conditioner) after cleaning the pores of your leather to restore the Leather's natural oils.
Leather Care Liniment (Conditioner) No. 1 This is the ideal conditioner for leather of more natural qualities, lighter hues, and premium leather, due to its gentle yet highly enriching effects. In fact, Liniment’s versatility is immediately evident, adapting with ease to beautify and enrich nearly any kind of leather, from full-grain and vegetable-tanned to exotic crocodile and deerskin. This recipe is a true Jack-of-All-Trades. If you’ve got leather, Liniment’s got you covered. Once you've restored the leather's natural oils, time to protect your leather with the Water Protectant.
Leather Water Protectant No. 3 After conditioning your leather, it is time to protect your leather. Its thick consistency will bolster your leather’s natural defences while providing a rich source of nourishment to keep it healthy and strong. When applied, Water Protectant should cause water to bead on the surface of your leather, rolling off rather than being absorbed. Also ideal for excessively dry leather or leather in need of restoration. High concentrations of oils and nutrients greatly supplement proteins holding leather fibres together, and will also give your leather a more pleasant look and texture. It is very effective for covering scratches and scars and is known to restore colour on some leathers. It does not waterproof your leather (waterproofing leather destroys them), but it helps to protect your leather against harsh weather conditions or external elements, thus allowing it to last longer.
How to use?
IMPORTANT! Use the product in this order: Cleaner, Liniment & Protectant.
1) Shake the product before using them.
2) Apply a small amount on your Care Cloth and in a circular motion, gently wipe the cloth on your leather (try on a discreet spot first).
3) Let it dry thoroughly before applying the next product. Do not dry them under direct sunlight.
4) After applying the Water Protectant, let it dry thoroughly for at least 12 hours before using the item.
These products are also perfect for...
Leather Bags, Furniture and Apparels Our recipes are the optimal blend of water, penetrating natural oils and other all-natural ingredients specially designed to deeply penetrate leather pores, remove harmful contaminants, and simultaneously clean, protect and condition all your leather products.
Eco-Friendly, All-Natural and Safe for Human Skin! Brewed to perfection with all-natural ingredients and an optimal pH-balanced recipe, our leather conditioners and cleaners stand out from the crowd. As you condition and clean, the recipes will tease your nose with subtle sensations. These robust scents last only as long as the conditioner takes to absorb, and will not affect your leather’s natural scents. Leather Milk Conditioners and Cleaners are earth-conscious and made with cosmetic grade ingredients completely natural and safe for human skin.
Easy Application The cream texture designed for easy application and maximum absorption will melt into your leather products as easily as butter on hot bread. Enrich your leather colour and give it the soft, supple texture it deserves. As it absorbs and conditions, it will strengthen the fibres of your leather, making it grow stronger, and live longer.
All Leather Milk products are made in the USA.
Quantity 1 oz (about 30 ml)
If you're between sizes
Size up for a more relaxed fit
Size down for a snug fit.
Check out our illustrated guide here. This guide will walk you through each step towards finding your shoe size. Compare your measurement against the size chart below.